1. Model of machine tool: determine which type of mold structure is long or short guide, and whether it is imported Murata structure or fast structure. 2. Tonnage of machine tool: whether the blanking force of the die is applicable to the machine tool; otherwise, the structure of the die must be changed or other processing methods must be selected; 3. Whether there is a rotating station: if the machine station is a non rotating station, the double keyway structure must be considered for the guide sleeve or lower die; 4. The distance between the upper and lower turntables of the machine tool: in order to determine the height of the lower mold of the mold (forming mold); 5. Processing plate information: the material and thickness of the plate processed by the customer must be determined to determine the material and clearance selected by the mold; 6. Mold type: there are many kinds of molds. It is necessary to define the mold type ordered by customers; The orientation of the die (7) must be determined according to the customer's requirements, except for the square groove of the die. .jpg)
| 
